How Brian Iverson Built the Thermal Suite—from the Ground to a Balanced, High-Performance Building System

NOTE: This is currently a draft version. Any early-access purchasers will receive an updated version upon it’s publication (estimated 8/8/26)

A high-performance building is not a collection of products. It is a sequence of connected decisions.

Brian Iverson built the Thermal Suite to test more than fifty years of field experience in one complete building. He wanted to see whether a compact, attainable home could control heat, air, water, vapor, drainage, ventilation, and mechanical performance as one continuous system—and then prove its performance after construction was complete.

The Carbonless Builder® Standard Field Guide is the record of that experiment.

Across 30 construction stages and approximately 60 field photographs, Brian documents how the Thermal Suite was built—from evaluating the property and preparing the foundation to completing the enclosure, testing airtightness, balancing the mechanical systems, controlling indoor humidity, and examining the occupied home through thermal imaging and real-world performance data.

This is not a polished showcase in which every decision is presented as perfect. The Thermal Suite is the house that helped produce the Carbonless Builder® Standard, and Brian documents where the building fell short as plainly as where it succeeded. When thermal imaging revealed that the under-slab insulation was not performing to the level he expected, he did not defend the original specification. He changed the Standard.

That honesty is what makes this a field guide.

Inside, you’ll follow the project through three complete acts:

• Can you build it? Site conditions, utilities, excavation, water management, foundation systems, thermal breaks, framing, control layers, windows, roofing, and the ventilated exterior cavity.

• Can you make it work? Airtightness testing, mechanical rough-in, controlled ventilation, commissioning, room-by-room balancing, and year-round humidity management.

• Did it actually perform? Occupied-building performance, real energy use, thermal imaging, measured surface temperatures, deficiencies discovered, and lessons carried forward into the Standard.

Each stage is organized to document what was built, the governing specification, the order in which the work occurred, practical field notes, supporting photographs, and the performance requirement established by the Carbonless Builder® Standard.

Particular attention is given to the transition where all eleven building-control layers must remain continuous from the footing, through the walls, and across the roof. Structure, thermal control, airtightness, bulk-water management, drainage, capillary control, vapor strategy, fire protection, acoustics, passive ventilation, and resistance to wind and seismic forces are treated as parts of one connected building—not isolated decisions assigned to different trades.

What this guide teaches

This guide shows:

• The actual order in which the Thermal Suite was constructed

• How continuous thermal and air-control layers were carried through critical transitions

• How a thermally broken wall and roof system was assembled

• Why concealed assemblies were photographed before they were covered

• What Brian learned from an initially disappointing blower-door test

• How an extremely low mechanical load created a new humidity-control challenge

• What post-occupancy testing revealed about the finished building

• Which decisions Brian would repeat—and which ones he would change

What this guide is—and is not

This is a construction field record focused on what was built and how it was assembled. It is designed to complement the forthcoming Carbonless Living System™, which teaches the deeper building science, design reasoning, and whole-building methodology behind the decisions.

The guide is educational and documents one building in one climate zone. It is not a set of architectural plans, engineered schematics, code approval, or professional advice for a particular project. Every building must be evaluated and designed for its own site, climate, adopted codes, and conditions by appropriately qualified professionals.

The Field Guide shows what was built. The Carbonless Living System™ teaches why.

• 30-stage construction sequence

• Approximately 60 field photographs

• Foundation-to-roof control-layer documentation

• Airtightness, ventilation and humidity-control lessons

• Measured post-occupancy performance

• Honest documentation of failures and corrections

• Based on Brian Iverson’s Thermal Suite

• Digital field guide

We will be releasing the full Retrofit & Remodel Field Guide soon! For now, use this page for early access purchases - we’ll send you the DRAFT field guide, and deliver the full version once the official publication version is complete.

Performance Criteria for Super-Efficient, Off-Grid-Capable Residential & Light-Commercial Buildings

What does “high performance” actually mean when you stop talking about products and start measuring the completed building?

The Carbonless Builder® High-Performance Standard & Field Guide takes the Carbonless methodology to its practical limit: reduce the building’s energy demand first, then make the remaining load small enough for efficient mechanical systems, renewable generation and storage to handle realistically.

The governing rule is simple:

Waste less first. Make the power second.

This working draft translates that philosophy into measurable criteria for the entire six-sided building enclosure—from the earth beneath the slab to the roof above it—including thermal continuity, airtightness, water management, vapor and drying strategy, thermal bridging, windows and doors, ventilation, humidity control, mechanical integration, testing, commissioning and long-term documentation.

Inside, you’ll explore:

• Whole-assembly performance rather than nominal insulation values

• Continuous thermal, air, water, vapor and drainage control layers

• High-performance slab, foundation, wall and roof assemblies

• Thermal-bridge identification and reduction

• A current working airtightness target of ≤ 0.50 ACH50

• Climate-specific moisture and drying strategies

• The Carbonless Lung drained and ventilated exterior cavity

• Integrated ventilation, filtration and humidity management

• Off-grid-capable energy and storage planning

• Verification, commissioning and detailed field checklists

• The Carbonless Building Passport

• Return on Efficiency™ and lifecycle-cost analysis

• Brian Iverson’s field tests, observations and lessons developed through decades of real-world building experience

This is not a product catalog. Manufacturers and materials will change. The Standard defines the job the building must perform.

EARLY-ACCESS EDITION

You are purchasing the current August 2026 Working Draft at a reduced early-access price.

You’ll receive the draft immediately so you can begin studying and applying the methodology now. When the completed Carbonless Builder® High-Performance Standard & Field Guide is published, early-access purchasers will receive the completed edition at no additional charge.

The current performance criteria remain a working standard and are subject to continuing testing, engineering, whole-assembly calculations, hygrothermal analysis, research verification and final Carbonless approval.

The envelope is permanent. Equipment is temporary. Build the part that lasts accordingly.

Affordable Housing matters. Affordable Living matters more.